4 Tricks To Maintain And Clean Your Washing Machine
Cleaning and maintaining your washing machine is important. That applies to all appliances in the house, even if they are used to clean other things.
Neglect can prevent a washing machine from doing its job properly and not cleaning your clothes properly.
Because it is often exposed to moisture, it is common for mold and detergent to build up.
While you’ll probably ignore it at first, it can become a major problem over time, creating foul odors that also get into your clothes.
Routine disinfection and washing machine maintenance not only prevent this problem, but also keep all parts working properly.
Below we’ll share with you four of the best maintenance tips to keep your washing machine running smoothly and your laundry perfectly clean.
Try these tricks to maintain your washing machine
1. General cleaning and maintenance
The combination of hot water and apple cider vinegar is one of the best ways to maintain your washing machine. The substance removes bacteria and mold, while it dissolves difficult stains.
It’s a good idea to do this treatment at least once a month to avoid mold and foul odors.
Ingredients
- hot water
- 125 ml apple cider vinegar
Clues
- Fill the washing machine with the warm water, add the apple cider vinegar and start a short cycle.
- When the program is finished, open the flap or door and let it air out for an hour.
2. Clean the filter
The washing machine filter is located in the drum on some machines. It is probably the hardest part to clean and it requires a lot of attention.
It’s not really about which product you use in this case, because it’s about cleaning the filter and removing any dirt that may have stuck to it.
Clues
- Unplug the power supply, make sure the washing machine is completely empty and remove the filter cover.
- Unscrew the cover to remove it completely.
- Remove all fibers, paper, dirt, and anything else that doesn’t belong in the filter.
- Now take a screwdriver and use it to turn the drum over so that you can remove all the dirt that is still in it.
- Put the filter back in place before using the washing machine again.
3. Clean the rubber
Mold and foul odors often arise in the rubber seal, because that is where the moisture collects. And although you can dry this after every wash, there will always be moisture that will cause problems in the long run.
To kill bacteria and fungus , we are going to use the antiseptic properties of hydrogen peroxide and lemon.
Ingredients
- 3 liters of water
- 60 ml lemon juice
- 250 ml hydrogen peroxide
Clues
- Squeeze the juice from a fresh lemon and mix it in a bucket with the water and hydrogen peroxide.
- Observe how the rubber is positioned so that you can put it back properly later.
- If you see mold, spray it with the lemon disinfectant and wipe it off with a sponge.
- Clean all rubber to remove all mold.
- Before putting the rubber back on, spray with the solution one more time and wipe it dry with a dry cloth.
4. Clean the detergent drawer
The detergent and fabric softener drawer is also often dirty, as a lot of residue is left behind, especially if you use powder for washing.
Cleaning your washing machine also means cleaning this drawer. Residue can stick to the sides and cause bad odors.
Ingredients
- 250 ml white vinegar
- 1 liter of hot water
Clues
- Dilute the vinegar in the hot water.
- Take out the tray and place it in the solution. Let it soak for ten minutes.
- Wipe it clean and dry it.
- If you can’t remove the tray, spray the solution on it and clean it with a sponge.
How often should you clean your washing machine?
Cleaning and maintaining your washing machine is something you should do regularly. Try to apply the routine every two months, otherwise it will be less effective and mold can still develop.
Every time after using the washing machine, you should leave the valve open for airing.
